Sony A95K OLED TV Review

The frame of the Sony A95K is similar to other Sony TVs, but it has a unique stand that lets it sit flat against the table and hides the stand behind the display. It also comes with a detachable camera that sits on top of the TV.

The Sony A95K has a unique stand that puts the TV completely in front and hides the stand, and is called the 'Front' position. This makes the display sit flush against the table. If you don't like that, there's an alternate position that puts the stand in front, as you can see here, which Sony calls the 'Back' position because the screen is in the back. The stand also includes pieces that you can take off to make it easier to hold if you need to carry the TV. Unfortunately, placing a soundbar in front of the TV in either position blocks the screen.

Footprint of the 65-inch TV:

• In the standard position (Front): 56.7" x 11.9"
• In the alternate position (Back): 56.7" x 11.2"

The back of the TV features textured plastic with a checkerboard pattern that's typical of Sony TVs. The inputs can be difficult to reach if you wall-mount it, especially if you use the input covers. The back includes covers for cable management, including two covers for part of the stand, and unlike the Sony X95K, they stay in place well.

The top and side bezels are thinner than the bottom bezel, which is about one inch thick.

With the Sony A95K in the 'Front' stand position, it leans back about three degrees, so if that bothers you, then you can use the alternate 'Back' position where the TV doesn't noticeably lean back.

The Sony A95K has fantastic build quality. The entire unit is well put together as it's solid, and there aren't any noticeable issues. The base of the stand is metal covered in plastic, and the borders of the display are also metal, while everything else is premium plastic. The frame of the display is solid and doesn't feel like it would break like with the Samsung S95B OLED. The stand is also very solid, as it's heavy and there's minimal wobble. The downside is that the plastic in the back panel flexes easily, but this isn't a problem unless you're pressing against it.

The Sony A95K has a QD-OLED panel, which is a type of OLED panel, and it has a near-infinite contrast ratio, so it displays perfect blacks next to bright objects in dark rooms. However, because it lacks a polarizing layer, the black levels raise when there's a bright source on the screen, so blacks look closer to purple, which is typical of QD-OLEDs like the Samsung S95B OLED.

The Sony A95K doesn't have a backlight, but thanks to its near-infinite contrast ratio, it's equivalent to a perfect local dimming feature. We still film these videos on the TV so you can see how the screen performs and compare it with a TV that has local dimming.

The Sony A95K has great HDR peak brightness. Highlights pop, and it delivers an impactful HDR image. These results are in the 'Custom' HDR Picture Mode with the Brightness at its max, Contrast at its default of '90', Color Temperature set to 'Expert 2', and HDR Tone Mapping on 'Gradation Preferred'.

Although it's dimmer than the Samsung S95B OLED in our tests, the two TVs are very similar, and the brightness also depends on the content. However, the Samsung is slightly brighter overall because it focuses on brightness over accuracy.

Our HDR tests use HDR10, which is the basic HDR format that uses static metadata. However, the Sony model supports the more advanced Dolby Vision format, and there are two Dolby Vision picture modes: 'Dolby Vision Bright' and 'Dolby Vision Dark'. Using the 'Wheel Of Time' on Amazon Prime Video, we measured highlights in different scenes with both modes. As you can see, the brightest setting is 'Dolby Vision Bright' and still retains shadow details well and looks accurate, but 'Dolby Vision Dark' is also a good choice if you don't need the brightest highlights.

When looking at the A95K and S95B side-by-side, 'Dolby Vision Dark' on the Sony looks very similar to the S95B, but 'Dolby Vision Bright' produces a visibly brighter and more impactful image. Also, tone mapping is better on the Sony as there's black crush and lost details on the Samsung. Because of this, the Sony TV has the advantage with HDR content, even if the Samsung TV can display slightly brighter highlights.

The Sony A95K has good HDR brightness in Game Mode. It looks dimmer in Game Mode, but it's still bright enough for an impactful HDR gaming experience. The results are with the same settings as outside of Game Mode, but with the Picture Mode set to 'Game'.

The Sony A95K has incredible PQ EOTF tracking. It displays content at their correct brightness up until the peak brightness, but as there's a sharp roll-off, bright details are lost. If you find the image too dim, you can set the Contrast to its max, HDR Tone Mapping to 'Brightness Preferred', and Advanced Contrast Enhancer and Peak Luminance on 'High'. This results in a brighter image, as you can see in this EOTF, but it doesn't change the peak luminance.

The TV was tested with HDR Tone Mapping set to 'Gradation Preferred'. This makes the TV track the EOTF well, but setting it to 'Brightness Preferred' or disabling it both make the image appear brighter.

The Sony A95K has decent SDR peak brightness, but it isn't as bright overall as the Samsung S95B OLED. It gets bright enough to fight glare from a few dim light sources, but considering the raised black level issue in well-lit rooms, it's better to use this in a dark or dim room. It also has an aggressive Automatic Brightness Limiter (ABL) that causes larger areas of bright colors to appear dimmer, which can be problematic while watching sports like hockey or basketball. Also, the SDR brightness dims over time, notably in Game Mode. If you leave a static image on the screen while gaming, the brightness drops about 30-40 nits after a few minutes, but it isn't noticeable, and it isn't an issue if the content on the screen is constantly changing.

We tested it again in an air-conditioned room at about 73 F (23 C), and it didn't change the brightness results in the individual windows compared to our original testing. However, we measured the Real Scene brightness after letting the TV cool down enough following the peak brightness, and this resulted in an increased brightness of about 70 nits. Letting the TV cool down a bit results in the higher peak brightness, but if you're using it for a long period and it's warm, it will likely be dimmer.

These results are in the 'Custom' Picture Mode after calibration with the Brightness at its max, Contrast at its default of '90', Color Temperature set to 'Expert 1', Gamma on '0', and Peak Luminance on 'High'. If you set Gamma to '-2' the brightness increases slightly to 360 nits. The Peak Luminance setting helps make the TV brighter, but it also causes the variation in brightness, so if you choose to disable it, there isn't any ABL, but the screen is a lot dimmer:

• Peak 2% Window: 125 cd/m²
• Peak 10% Window: 124 cd/m²
• Peak 25% Window: 124 cd/m²
• Peak 50% Window: 124 cd/m²
• Peak 100% Window: 125 cd/m²
• Sustained 2% Window: 125 cd/m²
• Sustained 10% Window: 123 cd/m²
• Sustained 25% Window: 122 cd/m²
• Sustained 50% Window: 122 cd/m²
• Sustained 100% Window: 122 cd/m²

If you want the brightest image possible and don't care about accuracy, then use the 'Vivid' Picture Mode with the Brightness and Contrast at their max, Advanced Contrast Enhancer, Black Adjust, Peak Luminance, and Live Color each on 'High', and the Color Temperature on 'Cool'. This results in brightness of 773 cd/m² in the 2% window.

The Sony A95K has an exceptional HDR color gamut with remarkable tone mapping. It displays colors nearly perfectly in the commonly-used DCI-P3 color space, meaning images look life-like, and it preserves details well. It's a clear advantage over the Samsung S95B OLED as details aren't lost in dark areas, and this is due to the way that Sony focuses accuracy over brightness with this TV. It's also future-proof because it has excellent coverage of the wider Rec. 2020 color space that's going to be used in more and more HDR content, and the tone mapping is also fantastic.

This was tested with the HDR Tone Mapping setting on 'Gradation Preferred'. The 'Brightness Preferred' setting performs about the same, but tone mapping is much worse with the setting disabled, as you can see below:

The Sony A95K has remarkable HDR color volume. It's very similar to the Samsung S95B OLED, but some colors, like pure white, aren't as bright, while others, like cyan and yellow, are brighter. It's better than most TVs on the market as it displays colors at a wide range of luminance levels.

The Sony A95K has good out-of-the-box accuracy in SDR. Although most colors are accurate, the white balance is off, particularly with brighter shades of gray. It's somewhat expected, as instead of the most common D65 white point, Sony targets an alternate white point at the factory. For consistency across our TV reviews, pre-calibration accuracy is always measured with the D65 white point instead of the Judd alternate white point, as it's the most common calibration target. Still, gamma is nearly spot-on with our 2.2 target for moderately-lit rooms, and the color temperature is also close to the 6500K target.

The Sony A95K has fantastic accuracy after calibration to the D65 white point. We warmed the TV up for 120 hours before calibrating and testing it, and it's easy to calibrate. Since the colors are already accurate before calibration, we only had to slightly adjust them. The white balance is much better, and both gamma and the color temperature are spot-on with the targets.

You can see the full settings for our calibration here.

The Sony A95K has amazing gray uniformity. The screen is uniform throughout, and there's minimal dirty screen effect in the center. Like with any OLED, there are faint vertical lines in near-dark scenes, but you only see them if you sit close and look for them.

The Sony A95K has perfect black uniformity as there isn't any blooming around bright objects.

The Sony A95K has an outstanding viewing angle. Although it isn't perfect, you won't have any issues using it in a wide seating area as people viewing it from the side see the same image as in front.

The Sony A95K has incredible reflection handling as it minimizes glare from bright light sources very well. However, any ambient light also causes the black levels to raise, meaning blacks look closer to purple. It's best to avoid placing it in a bright room if you want to see perfect black levels. You can see an example of it with the LG G2 OLED next to the Samsung S95B OLED here, or with the Dell Alienware AW3423DW monitor here.

The QD-OLED panel on the Sony A95K uses a unique subpixel structure. Unlike most TVs, the pixels aren't in a row, and instead, they form a triangular shape, with the green pixel on top and the red and blue pixels on the bottom. It results in some color fringing when displaying content with black bars on the top and bottom, as you'll see a thin green line at the top and a thin red line at the bottom, but they aren't noticeable if you sit far anyways. The subpixel structure isn't ideal for PC use as it causes some issues with the text clarity, which you can learn more about in the Dell Alienware AW3423DW review. Windows ClearType can't correct it, but there are workarounds like using third-party software to improve text clarity or increase the scaling. Also, you'll only notice these text clarity issues if you sit close, but as it's only available in 55 and 65 inches, you should sit far away enough that they aren't visible.

You can see alternate pixel photos below:

• Alternate 1
• Alternate 2
• Alternate 3
• Alternate 4

The Sony A95K has a near-instantaneous response time that results in almost no motion blur with fast-moving objects. However, because OLEDs use a sample-and-hold method, there's still persistence blur.

The Sony A95K isn't technically flicker-free because there's a slight dip in brightness every 8 ms, which coincides with the refresh rate. However, it isn't the same as pulse width modulation on LED TVs because it isn't a full on and off, and it isn't noticeable either.

The Sony A95K has an optional black frame insertion feature to reduce persistence blur. It only flickers at 60Hz, which isn't ideal for 120 fps games. The BFI score is based on its flicker frequency and not its actual performance. Also, you can't use the BFI feature at the same time as VRR.

The Sony A95K has a motion interpolation feature to bring lower frame rate content up to 120 fps. Like most TVs, it looks best with slow-moving content, but there are distracting artifacts with small, fast-moving objects. Setting the Smoothness to its max makes the motion interpolation look bad, and it's better to leave it at '1' or '2'.

Due to the near-instantaneous response time, there's noticeable stutter as each frame is held on longer with low-frame-rate content. Enabling the motion interpolation can help reduce this, but it isn't a perfect solution.

This TV removes 24p judder from any source, including those that output content in 60Hz. It helps with the appearance of motion in movies. When you enable the BFI feature, it removes judder from 24p sources, but not with 60p/i sources, like a cable box.

The Sony A95K supports variable refresh rate (VRR) formats to reduce screen tearing. HDMI Forum VRR and G-SYNC compatibility both work without issue, and it supports Low Framerate Compensation (LFC) to continue working when the frame rate drops too low. Because the TV upscales 1440p content to 4k, and it isn't a proper 1440p signal, we left 1440p VRR as untested, but VRR works properly with 1440p @ 60Hz games.

The Sony A95K has low input lag for a responsive gaming feel. It's higher than the Samsung S95B OLED and other premium TVs, but it's still low enough that you won't notice any delay while gaming. If you're very particular about input lag and would like a similar TV but with lower input lag, check out the LG C3 OLED.

The Sony A95K supports most common resolutions up to 4k @ 120Hz, and there aren't any resolution halving issues that some past Sony TVs had. While there are some text clarity issues due to its subpixel layout (see Pixels for more), it still displays proper chroma 4:4:4 with any of its supported resolutions. If you want to send a 1440p @ 60Hz signal, you have to force it with a custom resolution from your PC. However, keep in mind that HDMI ports 3 and 4 support full HDMI 2.1 bandwidth, allowing the TV to display these various resolutions like 4k @ 120Hz. HDMI ports 1 and 2 support HDMI 2.0 bandwidth, so it can't display certain signals like 4k @ 120Hz 4:4:4 with devices connected to those ports.

The Sony A90K works properly with the PS5 as long as you have it connected to HDMI 3 or 4 because they support full HDMI 2.1 bandwidth. As it's a Sony product, it has a few proprietary features made for the PS5, like Auto HDR Tone Mapping, and its ALLM support automatically puts the TV into Game Mode without changing any settings.

The Sony A95K works without issue with the Xbox Series X, except it doesn't support 1440p @ 120Hz. Also, Dolby Vision only works up to 4k @ 60Hz, and if you want a 4k @ 120Hz signal, the TV doesn't support Dolby Vision. The TV also supports ALLM, but unlike the PS5, you need to enable Auto Picture Mode for it to work. You need to have the Xbox connected to HDMI slots 3 or 4 to use it to its full capabilities as they support HDMI 2.1 bandwidth.

Unlike the Samsung S95B OLED, the Sony A95K supports Dolby Vision but not HDR10+. HDMI ports 3 and 4 also support the full 48 Gbps bandwidth of HDMI 2.1, while HDMI 1 and 2 are limited to HDMI 2.0 bandwidth, so they don't support as many signals like 4k @ 120Hz. The ATSC 3.0 support also allows you to stream over-the-air channels in 4k.

The Sony A95K has both bottom and side-facing inputs, although the majority are at the bottom. You can also see the power input on the back left side here and the camera input on top here.

The Sony A95K supports eARC, allowing you to pass high-quality, uncompressed audio to a compatible receiver through an HDMI cable. However, because the eARC port is also one of the HDMI 2.1 ports, you can only connect one other HDMI 2.1 device if you connect a soundbar or receiver that doesn't support HDMI 2.1 passthrough. You can also connect a compatible Sony soundbar to the S-Center speaker input and use the TV's speakers as a center channel.

The Sony A95K has a decent frequency response. It has a well-balanced sound profile with moderate listening levels and gets loud, but there's more compression at its max volume. Like most TVs, it doesn't produce much bass, so you need a proper surround sound setup for the best sound possible. These tests were done with the stand in the 'Back' position (the stand in front of the TV), using the digital room correction feature.

The Sony A95K has decent distortion handling. It performs well with moderate listening levels but gets worse at its max volume.

The Google TV interface is user-friendly, and navigating through the menu feels very smooth. It may take time to learn, but once you do, it's a great smart platform.

Unfortunately, like most TVs, there are ads throughout the interface. You can opt-out of personalized ads; however, you'll get non-targeted ads instead.

The Google Play Store has tons of apps available to download, and they run very smoothly. It has Google Chromecast built-in, meaning you can cast content from your phone.

The Sony A95K has a more premium remote than other Sony TVs, as it has a silver brushed finish. It features backlighting and has a sensor that illuminates the buttons in a dark room. The mic allows you to ask it to open apps, search for content, and switch inputs, but you can't change settings like the brightness. There's also a mic built into the TV that you can use for hands-free voice control or to help find your remote.

The TV comes with the BRAVIA webcam, which you can attach on top. It provides a few extra features like Auto Power Saving Mode that darkens the screen when you walk away and has Auto Calibration modes that adjust the picture and sound depending on where you're sitting. It will also support Gesture Control and Proximity Alert after firmware updates.

There's a single button above the side inputs to turn the TV On/Off, change channels, adjust the volume, switch inputs, or use the Find Remote feature. There's a switch to turn the built-in mic in the TV off if you're concerned about privacy, and you can also shut the camera when you aren't actively using it.

• Remote control
• 2x AAA batteries
• Cable tie
• User guides